Aeromesh Systems’ PTP-24 is an outdoor Point-to-Point wireless unit supporting 802.11b/g/n standard. This compact and rugged solution supports centralized provisioning and easy remote manageability via CLI, HTTP and SNMP. The device also supports remote firmware updates and includes a number of monitoring, trending and troubleshooting from a centralized NOC. The Aeromesh PTP-24 allows dynamic channel assignment, and data rate selection for greatest RF spectrum efficiency, supports event logging and statistics, Layer-2 and Layer-3 NAT monitors, client monitor, rogue device detection and reports signal strength history.


Aeromesh Systems PTP-24 equipment is small, sleek and rugged device with flexible mounting options, enabling the longest reach and instant mesh hand-off for large number of client devices compared to any other wireless devices.
Aeromesh PTP-24 is an ideal solution for a subscriber client. It is configurable to extend the reach of network to 100+ clients or as standalone 802.11n radio outdoor access point. It supports a broad range of voice, video and data applications delivering the highest performance and seamless mobility. The PTP-24 is an ideal choice for any communications network worldwide.
Aeromesh PTP-24 provides enhanced Quality of Service and supports the highest levels of security authentication and encryption to secure and protect clients. It also supports Multiple VLANs and data rate limiting.
While wireless-enabled laptops and other wireless devices don’t provide adequate power to communicate with outdoor mesh networks, the PTP-24 offers a multi-fold increases in power, enabling high-speed, reliable and long-range Point to Point and Point to Multipoint connections with Wi-Fi mesh, and extending network coverage over Ethernet to a large set of networked devices. PTP-24 supports passive Power over Ethernet (PoE) for easy installation and lower cost. All Aeromesh products are self-configuring, enable interference mitigation, provide network resiliency, and offer built-in troubleshooting tools and remote upgradeability for the most demanding environments.
Wireless
- Wireless Standards 802.11B/G/N
- Frequency Bands: 2.4GHz
- Receiver Sensitivity Rates
- -70dBm (MCS7 802.11n)
- – 90 dBm (6M 802.11g)
 
- Transmit Power: Up to 30 dBm
- Supported Channel Widths: 5, 10, 20, and 40 MHz
Physical
- Dimension: 260mm H x 85mm W x 45mm D
- Pole Mount
- Operating Temperature: -20°C to 55°C
- Storage Temperature: -40°C to 70°C
- Humidity: 5%~95% non-condensing
Interfaces and Ports
- 2 x 10/100 Mbps
- 1 Reset Button
Electrical
- Passive PoE 24V
- Max power : 8W
Modulations
- 802.11g: 16-QAM, QPSK, BPSK
- 802.11n: 16-QAM, 64-QAM, QPSK, BPSK
Remote and Local Management
- HTTP, HTTPS, CLI, Telnet, SSH1, SNMP, FTP
- Remote Management and Provisioning
- Bandwidth Provisioning
Antenna Specifications
- 2.4 GHz Internal Antenna
- 2X2 MIMO, 14 dBi
- Panel antenna
Features
- Comply with IEEE802.11b/g/n 2.4 GHz
- 1+1 10/100 Mbps WAN + LAN ports
- 300 Mbps WLAN RF capacity
- Smart QoS
- 8 BSSIDs Per Radio
- Configurable operating modes for 2.4 GHz Radio (STA/AP)
- Bridge and Router modes
- Well suitable for outdoor Edge deployment
Security & Encryption
- 802.11i Security: WPA-PSK, WPA2-PSK
- AES and TKIP encryption
- WPA2 Enterprise
- Wired Equivalent Privacy (WEP)
- MAC Address Access Control Lists
- Client Isolation
- Management VLAN
- Firewall
Operating Modes
- Station, Access Point
- Layer-2 NAT/WDS
- Layer-3 NAT, DHCP Server
Monitoring/Troubleshooting
- Clients, Wireless neighbor monitor
- Event Logging and Statistics
- Layer 2/3 NAT Monitor
- Signal Strength Indicator
- Diagnostic utilities
APPLICATIONS
- Up to 5 km long point-to-point Wi-Fi links compliant with IEEE802.11b/g/n 2.4 GHz
- Outdoor wireless hotspot
- Well suitable for outdoor Edge deployment