Aeromesh Systems’ EAP-6500 is 802.11ax compliant, dual band wireless access point, that can be used as extension to a multi-hop wireless mesh network, or as a wireless access point. It supports centralized provisioning and easy remote manageability via CLI, HTTP and SNMP. The device also supports remote firmware updates and includes monitoring, trending and troubleshooting features from a centralized NOC. The Aeromesh EAP-6500 allows dynamic channel assignment, automatic power control and data rate selection for greatest RF spectrum efficiency, supports event logging and statistics, Layer-2/3 NAT monitors, client monitor, rogue device detection and reports signal strength history.



Aeromesh Systems’ EAP-6500 equipment, powered by MIMO techniques is our highest performance outdoor wireless networking unit. The EAP-6500 is small, sleek, and rugged outdoor Wi-Fi Access Point with flexible mounting options, enabling the longest reach and instant mesh hand-off to many client devices.
EAP-6500 is an ideal solution for a subscriber client. It is configurable to extend the reach of network to 250+ clients or as standalone dual radio outdoor access point. It supports a broad range of voice, video and data applications delivering the highest performance and seamless mobility. The EAP-6500 is an ideal choice for any communications network worldwide.
While wireless-enabled laptops and other wireless devices don’t provide adequate power to communicate with outdoor mesh networks, the EAP-6500 offers an excellent balance of power and performance for the most excellent network experience. By improving signal strength, the mesh network is quickly detected, optimal channels selected, and secure client connections are established. All Aeromesh products are self-configuring, enable interference mitigation, provide network resiliency, and offer built-in troubleshooting tools and remote upgradeability for the most demanding environments.
Aeromesh EAP-6500 provides enhanced Quality of Service and supports the highest levels of security authentication and encryption to secure and protect clients. It also supports Multiple VLANs and data rate limiting.
Wireless Specifications
- Wireless Standards – B/G/A/N/AC/AX
- Frequency Bands:
802.11G/N
- 2.4 – 2.462 GHz (Americas, FCC)
- 2.4 – 2.472 GHz (Europe, ETSI)
- 2.4 – 2.497 GHz (Japan, MKK)
802.11A/N/AC
- 5.15 – 5.25 GHz
- 5.25 – 5.35 GHz
- 5.470 – 5.725 GHz
- 5.725 – 5.850 GHz
Receiver Sensitivity Rates -95dBm (max)
Transmit Power
- Up to 23 dBm
- EIRP up to 29 dBm
Modulations
- 802.11a/g: 16-QAM, QPSK, BPSK
- 802.11b: CCK, DQPSK, DBPSK
- 802.11n: 16-QAM, 64-QAM, QPSK, BPSK
- 802.11ac: 16-QAM, 64-QAM, 256-QAM, QPSK, BPSK
- 802.11axa/axg: 1024-QAM
Remote and Local Management
- HTTP, HTTPS, CLI, Telnet, SSH, SNMP, FTP
- Remote Management and Provisioning
- Bandwidth Provisioning
Physical
- Dimension: 10.63”H x 10.63”W x 2.95”D
- Weight: 1.20Kg
- Weather Rating: IP67 weather tight
- Wall/Pole Mount
- Operating Temperature: -20°C to 55°C
- Storage Temperature: -40°C to 80°C
- Humidity: 95% Non-condensing
Supported Channel Widths
- Up to 160 MHz
Antenna Specifications
- 2.4 GHz Internal Antenna : MIMO: 2X2, 8 dBi Omni directional antenna
- 5 GHz Internal Antenna : MIMO: 2X2, 8 dBi Omni directional antenna
Interfaces and Ports
- 1 x 2500 Mbps, 1 x 1000 Mbps
- 1 LED
Electrical
- PoE 48V, IEEE 802.3at PoE+
- Max power: 17.5W
Receiver Sensitivity Rates
- 802.11a/g: 16-QAM, QPSK, BPSK
- 802.11b: CCK, DQPSK, DBPSK
- 802.11n: 16-QAM, 64-QAM, QPSK, BPSK
- 802.11ac: 16-QAM, 64-QAM, 256-QAM, QPSK, BPSK
- 802.11axa/axg: 1024-QAM
Features
- Concurrent dual band Support (5.x & 2.4 GHz)
- 250+concurrent clients access
- 1201 + 574 (1775) Mbps WLAN RF capacity
- Smart QoS
- 16 SSIDs Per AP
- Configurable operating modes for 5GHz Radio (STA/AP)
- Bridge and Router modes
- Well suitable for outdoor and high client density deployment
- Fast roaming
- Band steering
- Air Time Fairness
Security & Encryption
- 802.11i Security: WPA-PSK, WPA2-PSK
- AES and TKIP encryption
- WPA3, WPA2 Enterprise
- Wired Equivalent Privacy (WEP)
- PPPoE
- MAC Address Access Control Lists
- Client Isolation
- Management VLAN
- Firewall, WIDS
Operating Modes
- Station, Access Point
- Layer-2 NAT/WDS
- Layer-3 NAT, DHCP Server
Monitoring/Troubleshooting
- Clients, Wireless neighbor monitor
- Event Logging and Statistics
- Layer 2/3 NAT Monitor
- Signal Strength Indicator
- Diagnostic utilities
Applications
- Concurrent dual band Support (5.x & 2.4 GHz) for 250+ concurrent client access
- Extension of wireless mesh network
- Outdoor Wireless Access Point