Aeromesh EWS-4500 is an ideal solution for a subscriber client. It is configurable to extend the reach of Aeromesh Access/One Network to 100+ clients or as standalone dual radio access point. It supports a broad range of voice, video and data applications delivering the highest performance and seamless mobility. The EWS-4500 is an ideal choice for any communications network worldwide.
Aeromesh Systems Access/One® Network EWS-4500 equipment, powered by Aeromesh Edge™ and MIMO techniques is our high performance Edge wireless network extensions for the longest reach of an outdoor wireless network. The EWS-4500 is a rugged device with flexible mounting options, enabling the longest reach and instant mesh hand-off for large number of client devices compared to other wireless devices.
While wireless-enabled laptops and other wireless devices don’t provide adequate power to communicate with outdoor mesh networks, the EWS-4500 offers a multi-fold increases in power, penetration and performance for the most excellent network experience. By improving signal strength, the mesh network is quickly detected; optimal channels selected and secure client connections are established. All Aeromesh Access/One products are self configuring, enable interference mitigation, provide network resiliency, and offer built-in troubleshooting tools and remote upgradeability for the most demanding environments.
Wireless Specifications
- Wireless Standards – G/A/N/AC
- Frequency Bands:
802.11G/N
- 2.4 – 2.462 GHz (Americas, FCC)
- 2.4 – 2.472 GHz (Europe, ETSI)
- 2.4 – 2.497 GHz (Japan, MKK)
802.11A/N/AC
- 5.15 – 5.25 GHz
- 5.25 – 5.35 GHz
- 5.470 – 5.725 GHz
- 5.725 – 5.850 GHz
Receiver Sensitivity Rates
- 802.11a/g/n HT20: -71dBm @MCS7
- 802.11a/g/n HT40: -71dBm @MCS7
- 802.11a/g: -77dBm @ 54 Mbps
- 802.11a/n/ac HT20: -69 dBm @MCS8
- 802.11a/n/ac HT40: -66 dBm @MCS9
- 802.11a/n/ac HT80: -66 dBm @MCS9
- 802.11a: -78dBm @54Mbps
Transmit Power
- Up to 23 dBm2 (802.11G/N)
- Up to 16 dBm2 (802.11A/N/AC)
Modulations
- 802.11a/g: 16-QAM, QPSK, BPSK
- 802.11b: CCK, DQPSK, DBPSK
- 802.11n: 16-QAM, 64-QAM, QPSK, BPSK
- 802.11ac: 16-QAM, 64-QAM, 256-QAM, QPSK, BPSK
Supported Channel Widths
- 5, 10, 20, 40, and 80 MHz
Antenna Specifications
- 2.4 GHz Internal Antenna
- MIMO: 2X2, 9 dBi
- 5 GHz Internal Antenna
- MIMO: 2X2, 14 dBi
Interfaces and Ports
- 2 x 10/100/1000Mbps Ethernet port
Electrical
- Passive PoE 24V
- Max power : 10.5W
Physical
- Dimension: 10.63”H x 10.63”W x 2.95”D
- Weight: 1.20Kg
- Weather Rating: IP67 weather tight
- Wall/Pole Mount
- Operating Temperature: -20°C to 55°C
- Storage Temperature: -40°C to 80°C
- Humidity: 95% Non-condensing
Features
- Concurrent dual band Support (5.x & 2.4 GHz)
- 250 plus concurrent clients access
- 867 + 300 Mbps WLAN RF capacity
- Smart QoS
- Multiple SSID support
- Configurable operating modes for 5Ghz Radio (STA/AP)
- Bridge and Router modes
- Well suitable for high client density deployment
- Fast and secure client roaming
- IPv6 support
- Automatic/Manual channel selection
Security & Encryption
- 802.11i Security: WPA-PSK, WPA2-PSK
- AES and TKIP encryption
- WPA2 Enterprise1
- Wired Equivalent Privacy (WEP)
- PPPoE1
- MAC Address Access Control Lists
- Client Isolation
- Management VLAN1
- Firewall
Operating Modes
- Station, Access Point
- Layer-2 NAT/WDS
- Layer-3 NAT, DHCP Server
Monitoring/Troubleshooting
- Clients, Wireless neighbor monitor
- Event Logging and Statistics
- Layer 2/3 NAT Monitor
- Signal Strength Indicator
- Antenna Aimer and other diagnostic utilities
Firmware
- Open/Strix
Applications
- Concurrent dual band Support (5.x & 2.4 GHz)
- 250 plus concurrent clients access
- 867 + 300 Mbps WLAN RF capacity
- Smart QoS
- Multiple SSID support
- Configurable operating modes for 5Ghz Radio (STA/AP)
- Bridge and Router modes
- Well suitable for high client density deployment
- Fast and secure client roaming
- IPv6 support
- Automatic/Manual channel selection